IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.
Before you start
The process to reset the Home Audio System to the factory settings varies depending on your model. Select the appropriate steps below based on the model number of your system.
If your model is not listed, check the manual on the support web page.
Note: The resetting procedure is in the Troubleshooting section of the Help Guide or Operating Instructions.
Resetting the system
IMPORTANT:
- Use the controls on the system to perform this operation.
- All user-configured settings will be reset to the factory default settings.
CMT-SBT20, CMT-SBT20B
- Press the On/Standby button to turn on the system.
- At the same time, press and hold the FUNCTION and EJECT buttons until RESET appears on the display window.
CMT-SBT40D, CMT-X3CD
- Turn on the system.
- At the same time, press and hold the FUNCTION and EJECT buttons until RESET appears on the display window.
CMT-X5CDB
- Disconnect the power cord and confirm that the STANDBY indicator is not lit. Then reconnect the power cord and turn on the system.
- At the same time, press and hold the FUNCTION and ON/Standby buttons until RESET appears on the display window.
GTK-X1BT
- Unplug and plug the power cord back in.
- Press the ON/Standby button to turn on the system.
- While holding down the
(STOP) button, press the FUNCTION button for about 3 seconds.
GTK-XB5
- Disconnect and reconnect the AC power cord (mains lead), and then turn on the system.
- At the same time, press and hold the FUNCTION
PAIRING and VOLUME - (minus) buttons for more than 5 seconds.
GTK-XB60, GTK-XB90
Resetting the system
- Using a pin or other pointed object, on the back of the unit press the RESET button.
- Press the
(POWER) button to turn the system back on.
Note: Pairing information is not deleted when you press RESET.
Restoring the system to the factory default settings
- Press the (POWER) button to turn on the system.
- At the same time, press and hold the FUNCTIONPAIRING and the VOLUME - (minus) buttons for more than 5 seconds.
GTK-XB7
- Disconnect and reconnect the AC power cord (mains lead), and then turn on the system.
- At the same time, press and hold the FUNCTION and the VOLUME - (minus) buttons for more than 5 seconds.
GTK-XB72
- Unplug the AC power cord (mains lead) from the system, then plug it back in.
- Press the (POWER) button to turn on the system.
- At the same time, press and hold the FUNCTION/PAIRING and - (VOLUME minus) buttons on the system for more than 5 seconds.
MHC-V02, MHC-V21, MHC-V21D, MHC-V42D, MHC-V43D, MHC-V71, MHC-V71D, MHC-V72D, MHC-V73D, MHC-V81D, MHC-V82D, MHC-V83D
- Unplug the AC power cord (mains lead) from the system, then plug it back in.
- Press the (POWER) button to turn on the system.
- At the same time, press and hold the GUITAR and MEGA BASS buttons for about 3 seconds.
MHC-V11
- Disconnect and reconnect the AC power cord (mains lead), then turn on the system.
- At the same time, press and hold the (STOP) and Folder - (minus) buttons until RESET appears on the display window.
MHC-V13
-
Unplug the AC power cord (mains lead) from the system, then plug it back in.
-
Press the (POWER) button to turn on the system.
-
At the same time, press and hold the FIESTA and GUITAR buttons for about 3 seconds.
