Sony SupportICD-UX560F

ICD-UX560F / UX565F Firmware Update For Mac OS

    Applicable Models
    About this download
    File Info
    Download
    Install

    Applicable Models

    This information is for the following models:
    • ICD-UX560F

    About this download

    This page provides instructions on how to update the firmware for IC Recorder ICD-UX560F / UX565F to version 1.03.

    Benefits of Update:

    • Addressed the issue where the IC Recorder may not properly operate during play back or may restart unintentionally.
    • Addressed the issue where the IC Recorder may not display some cover art.
    • Addressed the issue where the power of the IC recorder turns on unintentionally after a certain period of time while the power is off when the hold switch is operated or the headphone is plugged in or unplugged.

    Applicable Models

    ICD-UX560F / UX565F that have firmware version lower than 1.03. If the firmware version of the unit is already 1.03, there is no need to apply this firmware update program.

    How to confirm the Model and the Firmware version

    Please confirm the Model and the Firmware version from the steps below.

    • Press and hold the BACK/HOME button until the Home menu appears.
    • Select Settings → Common Settings → Unit Information

    Confirm the Model and the Firmware version.

    File Info

    File Name

    • ICD-UXx6x_V103.dmg

    File Version

    • 1.03

    File Size

    • 17.3 MB

    Release Date

    • 2015-12-10

    Download

    Target PC environments

    • macOS 10.13-10.15

    Important Notes

    • After updating, the firmware cannot be reinstated an earlier version.
    • Please backup all data from the unit to the computer in advance, since the data may be lost when updating as they are remained on the unit. We cannot guarantee in case the tracks and the data are damaged or deleted by this update.
    • When updating, the unit is needed to have a free space about 40 MB. Please confirm the size from the steps below.
    • When downloading the program and updating the firmware, log on to the computer with the administrator name or with any name which belongs to the administrator.

    Install

    Details

    Update procedure

    1. The update program download is started by clicking Download button.
    2. After completion of the download, connect your IC Recorder to your PC by USB connection.
    3. Quit all software running on your PC.
    4. Double click the saved file, and work by following displayed massages.
      * Please do not disconnect the unit from the PC during updating.
      * During updating, USB connection is automatically controlled and Connecting USB indication is off with the control.
      Note: the USB disconnect message may appear on some computers.

      Note for macOS 10.15 users:
      When you start the update tool the first time on macOS 10.15, a ["Software Update Tool" would like to access files on a removable volume] message is shown. If you click [OK], the updating starts. If you click [Don’t Allow], an error will be displayed and the updating will fail.

    5. When the message of completing updating is displayed, click Finish button.

    After update

    Please confirm the version when the update program is installed successfully with followingHow to confirm the Model and the Firmware versionsteps.
    The update program installation is succeeded when 1.03 is shown on the screen.