Sony SupportILCE-7 Series

Article ID : 00105483 / Last Modified : 30/03/2021Print

There is no image, the screen is blank or no sound is heard on the Clip-on LCD Monitor.

    NOTE: Power is required for the Clip-on LCD monitor to work. Check the following in advance:

    • When using a battery pack, make sure it is fully charged.
    • When using an AC Adaptor, make sure it is plugged in.

    When there is no image, the screen is blank, or no sound is heard on the clip-on LCD monitor, check the following:

    1. Make sure the camera is not in power save mode.
    2. Make sure the HDMI® cable between the camera and the Clip-on LCD Monitor is connected as follows and has not been disconnected.

      Image

    3. Try another HDMI cable, if you have one.
    4. The shooting image may not be displayed on this unit when using a camera that does not have the Live View function.
    5. Change the setting of the HDMI output signal on the camera.

    For information about features and how to for your camera, refer to the operating instructions supplied with the product.