Sony SupportFDR-AX33

FDR-AX33 Firmware Update For Mac OS

    Applicable Models
    About this download
    File Info
    System Requirements
    Download
    Install

    Applicable Models

    This information is for the following models:
    • FDR-AX33

    About this download

    Thank you for your continued interest in Sony products.
    Sony is offering a system software update for Digital 4K Video Camera Recorder FDR-AX33.

    Improvements:
    In addition to SDXC card, the camera records XAVCS format video with SDHC card.

    • When shooting movies in XAVC S format, it requires SD Speed Class10, or UHS Speed Class U1 or faster. (When recording in 100 Mbps or more, UHS Speed Class U3 is required.)
    • When an SDHC memory card is used to record XAVC S movies over extended periods of time, the recorded movies will be divided into files of 4 GB. The divided files can be integrated into a single file using PlayMemories Home.

    How to check the System Software version

    1. Select Menu > Setup > General Settings > Version on the camera.
    2. The System Software version is displayed. If the Version is version 1.10, this upgrade is not required.

    File Info

    File Name

    • Update_FDRAX33NMV110.dmg

    File Version

    • 1.10

    File Size

    • 247.7MB

    Release Date

    • 2016-04-26

    System Requirements

    • OS X

    Download

    Preparing for System Software update

    System requirements for a computer

    • Supported OS
      • Mac OS X v.10.9 – 10.11

    • Other System Requirements
      • Hard disk space: 500MB or more
      • RAM: 512MB or more

    Other Items

    • Power source for the camera
      Fully charged rechargeable battery pack NP-FV70 or AC Adaptor.

      Note: We recommend that you use a fully charged battery or the AC adaptor.

    • USB support cable supplied with the camera
      Note: Update functionality is not guaranteed with any other USB cable.

    Install

    Details

    Important Notes:

    • Please close all other application software before updating the system software.
    • Prevent your computer from sleeping beforehand.
    • When performing the system software update, please use a fully charged rechargeable battery pack NP-FV70 or the AC adaptor.
    • Do not remove the battery pack or AC adaptor during the update; otherwise, the camera may become inoperable due to the sudden power shutdown.
    • Remove the memory card from the camera beforehand.

    1. Download the update file
      Click on the file Update_FDRAX33NMV110.dmg to begin download. Please save the downloaded file onto the Desktop of your computer (recommended).

    2. Start Software Updater
      1. Do not connect the camera yet at this point. Double-click Update_FDRAX33NMV110.dmg to start up Software Updater.
      2. Double-click the Update_FDRAX33NMV110 icon which appears on the Desktop.
      3. Double-click the Software Updater icon.
      4. To load a kernel extension, the message prompts you to allow the application to make changes. Type the password for the administrative account.
      5. System Software Updater starts up.

    3. Check the USB connection mode
      1. Turn on the camera.
      2. According to the Software Updater instructions, select Menu > Setup > Connection > USB Connect Setting on the camera, then check if Mass Storage is selected.

        If a mode other than Mass Storage is selected, select Mass Storage.
    4. Connect the camera to the computer
      Remove the memory card from the camera beforehand, then connect the camera to the computer with the supplied USB cable. USB Mode appears on the LCD monitor of the camera.

    5. Check if update is required
      1. After confirming the screens above, click Next. The current version and the version after the upgrade appear on the lower left part of the screen.
      2. After confirming Current version is Ver.1.00, click Next.

        Note: If Current version is Ver. 1.10, the upgrade is not required. According to the message, stop the USB connection and click Finish. Turn off the camera, remove the battery pack or the AC adaptor, re-insert the battery pack or connect the AC adaptor and then turn on the camera.
    6. The camera automatically reset
      The screen below appears.

    7. Start the update
      After automatically resetting, the below screen appears and the update starts. The progress bar appears while updating (approximately 15 minutes).


      Note: Never turn off the camera nor disconnect the USB cable while upgrading.

    8. Complete the update
      When the update is completed, the camera will automatically restart. Make sure the camera is turned on and wait until the LCD screen appears again. Click Finish when the LCD screen appears and disconnect the USB cable.

    9. Check the System Software version
      Follow the instruction to confirm the System Software version is Ver. 1.10.

      1. Select Menu > Setup > General Settings > Version.
      2. The System Software version is displayed.