Gaming Monitor: Frequently Asked Questions

INZONE Hub is computer software that controls INZONE monitors and headsets. It allows you to personalize experiences by customizing a wide range of operations, including a variety of sound and picture settings. You can also assign specific picture modes and sound profiles of the headset to individual computer applications and games.

Operating systems: Windows 11, Windows 10

For more information about the INZONE Hub application, refer to the www.sony.net/inzonehub-support page.

Check the following:

• Install the latest driver for your graphics board.
• Use a suitable port and cable.
  • DisplayPort: Use a supplied DisplayPort cable. We recommend using a DisplayPort for PC connection.
  • HDMI: Use an HDMI 2.1 (Ultra High Speed) cable when connecting to an HDMI terminal.
• The computer may be slow when two or more displays are connected to it. This will depend on your computer and graphics board performance.
• We recommend performing a direct connection without a signal converter or docking station when you have an issue using them.

Please see the TUV_LowBlueLight_FlickerFree.pdf file.

Each individual monitor is calibrated on the production line before shipping, and a color calibration factory report is attached.

Adjust the refresh rate and resolution on the connected computer or the gaming console.

The settings screens do not change synchronously, but the settings are correctly changed from the INZONE Hub application or the monitor. To synchronize, exit the INZONE Hub application and launch it again, or close the setting screen of the monitor and display it again.

Please exit the PC Widget app and launch it again.

When you select the Sony monitor with multiple monitors connected, the monitor may flash to notify you that the monitor has been selected.
Note: The screen will only flash when the signal is SDR and will not flash during HDR signal.

Ghosting or inverse ghosting may appear during fast gameplay when the Response time is set to Faster. This is due to excessive panel overdrive which may cause slight yet noticeable visual artifacts in the image. To avoid ghosting or inverse ghosting, change the Response time to Standard or Fast.

To reduce the blooming or halo effect, try the following setting:

• Set the Local dimming to Low or Off.

Note: The setting may cause the whole screen to look washed out.

Try the following steps:

1. Disconnect the AC cable of the monitor and leave it unplugged for 1 minute.
2. Connect the AC cable again.
3. Turn on the monitor.

Try the following:

• Change the VRR setting to Off.
  Press the joystick on the back of the monitor to display the setting screen, and then select Gaming assist → Adaptive-Sync/VRR → set to off.
  Note: Turning off the VRR setting on the computer may also reduce the issue.
• Set the computer's operating system refresh rate to 240Hz.
  Note: Tearing may be visible when displaying at 480Hz, depending on the performance of the graphics card.

Yes, there is a one-year warranty for burn-in.

Notes:

• Normal usage, including gaming, is covered under warranty. However, misuse, abuse, and commercial use are not covered.
• The user manual provides information on which displays to avoid and methods to reduce the risk of image retention to help prevent burn-in. Following these instructions can prolong the lifespan of your monitor.

Try performing a manual Pixel refresh: Select Menu → Panel Settings → Pixel refresh.
Note: Please do not touch the screen during the Pixel refresh. (Amber LED on the right bottom will blink during Pixel refresh.)

Considering competitive games as sports, INZONE products were designed as professional gear for game players, which fit the flexible playing style of eSports players.
In combination with PlayStation®5, there is a sense of unity in design. You can combine the monitor with other gaming platforms, including gaming computers.

INZONE Hub is computer software that controls INZONE monitors and headsets. It allows you to personalize experiences by customizing a wide range of operations, including a variety of sound and picture settings. You can also assign specific picture modes and sound profiles of the headset to individual computer applications and games.

Operating systems: Windows 11, Windows 10

For more information about the INZONE Hub application, refer to the www.sony.net/inzonehub-support page.

You can control two computers or one computer and one gaming console, with a single set of a keyboard, mouse, and headset.
The device controlled by USB devices changes automatically, according to the video input source selected. KVM stands for Keyboard, Video, and Mouse.

Check the following:

• Gently wipe the screen or the exterior with a dry, soft cloth, such as an eyeglass cleaner.
• For inks from oil markers on the screen, soak a cloth in a non-soap synthetic cleanser, diluted with water to be less than 1% cleanser. Squeeze the cloth tightly to eliminate excess liquid, then wipe gently to remove the ink. Immediately afterward, gently wipe the screen with a soft, dry cloth.
• Don't use detergent with abrasives such as a cleanser.

Cables to connect the devices and the monitor are not supplied as the required cable type, version, or length depends on the customer's environment. The customer should purchase appropriate cables separately.

To minimize the desktop space, an AC adapter is selected. Its shape is optimized to reduce the amount of heat generated by the power supply and prevent the adapter from overheating.

• Install the latest driver for your computer's graphics board
• Use cables suitable for the type of video signal
  • When connecting to a DisplayPort: Use a DisplayPort 1.4 cable
  • When connecting to an HDMI terminal: Use an HDMI 2.1 (Ultra High Speed) cable
  • When connecting to a USB-C terminal: Use a DisplayPort Alt Mode cable

The specifications are as follows:

Speed

• USB-B: USB 3.0 (5 Gbps)
• USB-C: USB 2.0 (480 Mbps)
• USB-Upstream depends

Charge

• USB-A: 5 V, 0.9 A
• USB-C: 5 V, 3 A

Please see the TUV_LowBlueLight_FlickerFree.pdf file.

For the SDM-U27M90: The input lag time is 4.6 ms, which was measured via 4K/120fps game input based on the internal conditions. The actual lag time may differ in models, real-time usage environments, or specific conditions.

The specifications are as follows:

• DisplayPort: 48 Hz - 144 Hz
• HDMI: 48 Hz - 120 Hz

GtG (Grey-to-Grey) is a standard method of measuring response time, which is how long it takes to shift from one color to another. The response time of this model is 1 ms.

No, it does not support the Backlight Strobing feature.

Each individual monitor is calibrated on the production line before shipping, and a color calibration factory report is attached. Color accuracy is ΔE(Delta E) < 1 when HDR signal input.

Set the KVM switch correctly for USB charging. For details, refer to the Help Guide.
Note: Input signal changes are necessary to apply the setting.

Adjust the refresh rate and resolution on the connected computer or the gaming console.

For details on the restrictions on Power saving or Eco mode, refer to the Help Guide. In addition to the ones mentioned in the Help Guide, there are the following restrictions:

• Fixed refresh rate to 60 Hz
• Fixed Brightness

Check the following:

• FPS game: The setting is the optimum preset mode for shooter games which adjusts colors, contrast, and tone overall.
• Black equalizer: The setting adjusts the tone mapping only so that you can find objects easily in dark scenes.

You can save (export) and read (import) items to your computer only in Display Settings.
Note: Items in Device Settings and App Sync Settings cannot be exported or imported.

Available settings differ depending on the Preset mode or input signals.

• When the Preset mode is set as Standard, FPS game, or Cinema: Sony provides the best setting by default, and menu items are grayed out.
• When the Preset mode is set to Game1 or Game 2: Can be adjusted with desired settings. If Eco mode is on, the menu items are grayed out.
• When the input signal is HDR: Only the Aspect ratio can be set.

The settings screens do not change synchronously, but the settings are correctly changed from the INZONE Hub application or the monitor. To synchronize, exit the INZONE Hub application and launch it again, or close the setting screen of the monitor and display it again

Please exit and relaunch the PC Widget app

When you select the Sony monitor with multiple monitors connected, the monitor may flash to notify you that the monitor has been selected.
Note: The screen will only flash when the signal is SDR and will not flash during HDR signal.

This is a specification of the product. Only an input selection menu will be displayed when pressing the joystick on the monitor without an input signal.

When this message appears, use the joystick on the back right side of the monitor, then select either OK or Cancel. It cannot be turned off using a mouse.

Note: The entire message is: Auto picture mode signal was detected. Preset mode and Eco mode settings will be changed. Changing these settings will increase power consumption. (If Cancel, Auto picture mode will be turned off) Select using joystick

This happens when the VRR (Variable Reflash Rate) signal changes from the source device (from Off to On or On to Off). Depending on the VRR signal, it may take some time to adjust the signal frequency when switching. Please wait a moment until the picture refreshes.
Note: Disabling the VRR function on your source device minimizes the mute period but you can't enjoy the VRR function.

Set the KVM switch correctly, then select the input assigned to KVM switch 1 or KVM switch 2.
Note: For details, refer to the USB hub and Using the KVM switch (Auto switch function) sections in the Help Guide.

This may be improved by setting Adaptive-Sync/VRR to ON.
Notes:

• Set VRR to On when using an HDMI input. (only VRR is displayed on the Settings screen.)
• Set Adaptive-Sync to On when using the DisplayPort or USB-C inputs. (only Adaptive-Sync is displayed on the Settings screen.)

Ghosting or inverse ghosting may appear during fast gameplay when the Response time is set to Faster. This is due to excessive panel overdrive which may cause slight yet noticeable visual artifacts in the image. To avoid ghosting or inverse ghosting, change the Response time to Standard or Fast.

The LCD panel fitted to this unit is manufactured with high-precision technology, giving a functioning pixel ratio of at least 99.99%. A very small proportion of pixels may be stuck, either always off (black), always on (red, green, or blue), or flashing. This is not a malfunction.

To reduce the blooming or halo effect, try the following setting:

• For the SDM-U27M90: Set the Local dimming to Low or Off.
• For the SDM-F27M30: Set the Dynamic contrast to Low or Off.

Note: The setting may cause the whole screen to look washed out.

Some source equipment produces signals that can cause the monitor to wake from standby mode. To avoid this issue, use the Power button at the bottom of the back of the monitor to turn it off.
Note: By turning the monitor off in this manner, when you turn the monitor back on again you will need to manually turn on the source equipment as well.

When there is an update available, follow these steps to download and install the update using a Windows computer:

Notes:

• A notification will be displayed in the System Software Information section of the INZONE Hub software when a new update is available.
• If you don't have a Windows computer, please refer to the Contact support section of this article.

For all connection methods and the corresponding USB Hub setting of the monitor menu or the INZONE Hub software refer to the following:

When using HDMI port 1 or HDMI port 2 (A) for the video input connection and the USB Type-C terminal (B) for the USB connection, set the KVM SWITCH 1 to HDMI 1 Sync or HDMI 2 Sync.

When using HDMI port 1 or HDMI port 2 (A) for the video input connection and the USB Type-B terminal (B) for the USB connection, set the KVM SWITCH 2 to HDMI 1 Sync or HDMI 2 Sync.

When using DisplayPort (A) for the video input connection and the USB Type-C terminal (B) for the USB connection, set the KVM SWITCH 1 to DP Sync.

When using DisplayPort (A) for the video input connection and the USB Type-B terminal (B) for the USB connection, set the KVM SWITCH 2 to DP Sync.

When using the USB Type-C terminal (A) for the video input and USB connection, set the KVM SWITCH 1 to USB-C (DP Alt Mode) Sync.

When using the USB Type-C terminal (A) for the video input connection and the USB Type-B terminal (B) for the USB connection, set the KVM SWITCH 2 to USB-C (DP Alt Mode) Sync.

If the software update fails and an Update failed. Check the connection and try again error message appears on the INZONE Hub application, try the following:

1. Check the connection and settings in the How to update the software of the monitor? section of this article.
2. Disconnect the monitor's power cable and leave it disconnected for at least 1 minute, then reconnect it.
3. Restart the computer.
4. Try the software update again.

Note: This issue may occur if the computer is unstable, such as immediately after updating the Windows operating system.