IMPORTANT: This article applies only to specific products. Check Applicable Products and Categories for details.
When connecting a TV with TV center speaker mode or S-Center speaker mode to an audio system or sound bar, you can use your TV as part of your center speaker. By doing this, conversations will sound more natural because you can hear them from the screen and its surroundings.
Note: Models with TV center speaker mode or S-Center speaker mode have CENTER SPEAKER IN terminals or S-CENTER SPEAKER IN terminals on the back of the TV.
- CENTER SPEAKER IN terminal: By connecting to a home theatre system (with an AV receiver), you can use the TV speaker as a center speaker.
- S-CENTER SPEAKER IN terminal: You can use the TV speaker as part of your center speaker by connecting to a specific sound bar or AV receiver that has one of the following setups:
- An S-CENTER SPEAKER OUT terminal with a TV center speaker mode cable (supplied with the soundbar)
- A stereo 3-pole mini plug audio cable.
If your TV supports both the Acoustic Surface Audio / Acoustic Multi Audio and the Acoustic Center Sync:
- With Acoustic Center Sync, the sound can match exactly what's displayed on the screen exactly where the character is standing in the scene. This provides more precisely tuned actions and sound for a more immersive experience.
Note: This feature is available for TV models from 2021 or later.
The following is an example of a connection between an AV receiver and a TV. Use a speaker cable to connect the AV receiver to the CENTER SPEAKER IN terminal of the TV.
Note: Refer to your TV's Help Guide for details about connecting your TV to a sound bar using the S-CENTER SPEAKER IN terminal.
- A: AV receiver
- B: TV
- C: Speaker cable
- D: CENTER OUT terminal for speakers
- E: CENTER SPEAKER IN terminal
- The type of CENTER SPEAKER IN terminal varies depending on the model.
- F: HDMI cable or Optical digital audio cable
- The TV and AV receiver must be connected by either an HDMI cable (ARC connection) or Optical digital audio cable. For additional details, refer to the BRAVIA Connectivity Guide.
Notes:
- Connect the speaker cable properly so that the polarities (+/-) between the TV and AV receiver match.
- To output audio from a home theatre system, follow the steps below:
- For the BRAVIA 9 (XR90) / BRAVIA 8 (XR80) / BRAVIA 7 (XR70) / A95L series:
- Press the Quick Settings (
) button, then select Display & Sound → Audio output → Audio system settings.
If the Acoustic Center Sync is set to OFF, turn it ON.
- For BRAVIA TVs released in 2021 or later (except for the A95L series):
- Press the Quick Settings ( or
) button, then select Settings → Display & Sound → Audio output → Speakers → Audio system.
If the TV center speaker mode in Audio output is set to OFF, turn it ON.
- For other models:
- Press the HOME button, then select
Settings → Display & Sound → Audio output → Speakers → Audio system.
If the TV center speaker mode in Audio output is set to OFF, turn it ON.
- If you can’t output any audio from the speakers, you need to check the AV receiver’s setting or audio signal. Please refer to the AV receiver instruction manual for details.
IMPORTANT: This section provides information that is applicable when connecting to the CENTER SPEAKER IN terminal on your TV.
When you perform a calibration, use your audio system's automatic calibration function. The measured distance may be several meters farther than the actual distance. If your audio system does not have automatic calibration, manually set the center speaker level of your audio system to your preferred level.
