Sony Support

Article ID : 00270447 / Last Modified : 31/10/2023Print

How to set the TV sound mode to use the Enable 3D Audio for TV Speakers setting of the PlayStation®5?

    IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

    Make the following sound settings on the TV to use the Enable 3D Audio for TV Speakers setting of the PS5™:

    Notes:

    • You can turn on the Enable 3D Audio for TV Speakers function of the PS5 and the surround function of the TV at the same time, but doing so may make the sound effects overlap, causing the output to sound strange.
    • When listening with audio (Bluetooth® speaker, Headphone, Audio System) other than the TV speakers, turn off the Output 3D audio with TV speakers function of the PS5.
    1. Set Sound Mode to Standard
      Note: On some model TVs, you must first set the Sound Mode to Standard before you can set the Surround to Auto. If Sound Mode is not shown, you can skip this step and proceed with step 2 (Set Surround to Auto).
      1. Open the Settings screen.
      2. The next steps will depend on your TV menu options:
        • Select Display ＆ Sound → Sound → Sound Mode → Standard.
        • Select Sound → Sound Adjustments → Sound Mode → Standard.
        • Select Sound → Sound Mode → Standard.
    2. Set Surround to Auto:
      1. Open the Settings screen.
      2. The next steps will depend on your TV menu options:
        • Select Display ＆ Sound → Sound (TV Speaker) → Surround → Auto.
        • Select Display ＆ Sound → Sound → Sound customization → Surround → Auto.
        • Select Sound → Sound Adjustments → Surround → Auto.
        • Select Sound → Surround → Auto.